Showing 33–48 of 234 results

HAILEA WATER PUMPS

R160.00R1,347.00

HAILEA

WATER PUMPS

– High Quality Ceramic Shaft.
– Ceramic bearing ensures continuous operation.
– All electrical parts are fully encapsulated in resin.
– Thermal overload switch protection.
– Ideal for larger features; fountains; rockeries; or waterfalls.
– Pre-filter is used for primary filtration, efficient and easy to disassemble and assemble.

HI981030 GroLine Soil pH Tester

R2,790.00

Product information “HI981030 GroLine Soil pH Tester
Designed to bring simplicity to pH testing of soil, the HI981030 GroLine Soil pH Tester is designed for taking direct pH measurements in soil for environmental and agricultural testing. The built-in probe features an open reference junction, conical glass tip, and a removable sleeve design making it ideal for measuring the pH of soil.

  • ±0.2 pH accuracy
  • Comes with all the necessary solutions and batteries- everything you need to get started measuring right away.
    Specialized electrode for spot checking the pH of soil and soil slurries.

http://hanna.co.za/shop/testers-monitors/ph-orp/2862/hi981030-groline-soil-ph-tester?c=339

 

 

HI981420 GroLine Hydroponic Nutrients Monitor for pH, EC, TDS, and Temperature

R7,900.00

Product information “HI981420 GroLine Hydroponic Nutrients Monitor for pH, EC, TDS, and Temperature
The HI981420 GroLine Monitor for Hydroponic Nutrients provides around-the-clock, continuous monitoring of pH, conductivity (EC & TDS), and temperature in hydroponic nutrient solutions.

  • Quick to setup, simple to use, this monitor was designed with Hydroponics, Aquaponics, and Greenhouses in mind. Make your nutrient solution easy to manage with the GroLine Monitor.
  • Get 24/7 pH&EC measurements for consistent yields every time.
  • Good Laboratory Practice (GLP) feature for professional accuracy.
  • Calibrate pH and EC with a single Quick Cal solution.

http://hanna.co.za/shop/testers-monitors/indicators-monitors/2842/hi981420-groline-hydroponic-nutrients-monitor-for-ph-ec-tds-and-temperature

 

 

IMF Centrifugal fan

R1,160.00R1,980.00

Features

The Mixvent Series is a very compact design of mixed-flow fans that is part of a very flexible system designed specifically for use in homes, hotels and apartments etc., as well as for hot and cold air transfer from one room to another.

Construction
The casings of the 1300/250 and 2000/315 models are of epoxy coated steel; other sizes are of reinforced injection moulded plastic. All units are provided with an integral mounting foot. Impellers are of injection moulded plastic/steel and of mixed-flow design.

Motors
Type – 2-speed. Models 160-350 are shaded pole; 500 and above are squirrel cage induction motor.
Electricity supply – 220-240V, single-phase, 50Hz.
Bearings – sleeve up to size 350/125 and ball for all other models. Speed-controllable using VA type speed controller in high speed only.

Internal Thermal Protection
By fuse to size 350/125 and auto-reset for the remainder.

Testing
Air flow to BS848:Part 1, 1980 Noise to BS848:Part 2, 1985

Special Features
The fans can be removed without disturbing the connecting ductwork via specially designed support brackets and a 2-speed switch can be supplied that suits all models. In addition to being used as single-stage fans the Mixvent range can be arranged in parallel, in series or in both parallel and series. Such flexibility enables higher air flow and pressure demands to be met. Refer to AMS representative for details.

Dimensions

Dimensions
Dimensions

Performance

Performance
Performance
Performance

Technical Data

Technical Data
Technical Data

Suggested Specifications

The In-line fans shall be of the Mixvent Series as supplied by AMS. Impellers shall be of mixed flow design and driven by 2-speed single-phase motors with integral thermal protection.

Sound Data

MAMMOTH GAVITA G1 (Tent Only)

R5,200.87

Designed by Mammoth and Gavita, especially for use with the new Gavita M Small Room Replacement Reflectors. The result of combining Mammoth Grow Tents and Gavita M Reflectors: ULTIMATE 1 and 2 light grow room with Maximized light uniformity made just for Gavitas Double Ended Light technology.

MAMMOTH PRO 100

R2,328.75

Mammoth Pro – is the tent series from Mammoth which comes just after the Elite in quality. The tent is still of very high quality with steel tube frame, strong zippers, reinforced plastic corners and very good high reflective 210D mylar material.

Pro tents have wide easy access doors with strong zippers. The floor is waterproof for some water but if you fill it up to much it may leak.

Specs:
Size: 100x100x200cm
16mm steel tubes that can take up to 30 kg load capacity
Multiple intake and extraction socks, 7x203mm
High light proofing level 2

MAMMOTH PRO 120

R2,484.00

Mammoth Pro 120 X 120 X 200cm Grow Tent

Top product for the professional customer
Light proof design
Quick and easy assembling
New designed strong frame with 19mm steel poles and high quality corners and connectors
Available in a wide range of sizes
Big doors offer easy access
Multiple inlets and outlets for flexible installation

MAMMOTH PRO 240

R6,210.00

Mammoth Grow Room Pro 240 240x240x200cm
Light proof design
Quick and easy assembling
New designed strong frame with 19mm steel poles and high quality corners and connectors
Available in a wide range of sizes
Big doors offer easy access
Multiple inlets and outlets for flexible installation

MAMMOTH PRO 240L

R4,220.00

Mammoth Pro 240L grow tent.

Highest quality professional grow tent by Mammoth. Dimensions: 2400 x 1200 x 2000mm.

Features:
Light proof design
Compatible with most hydroponic systems
Equipment tubes are strong enough to hold 60kg
Large doors – easy to access and work in
Various intakes and exhausts make setup flexible
Straps and hooks for easy integration of equipment
Material is washable inside and out
Steel frame with 16mm tubes
95% reflective Mylar 210D fabric
Quick and easy to assemble/disassemble
Removable water tray
Specifications:
Dimensions (W x D x H): 2400 x 1200 x 2000mm
Volume: 5.76m3
Doors: 2 Front, Rear 2, Side 1
Ventilation Windows: 2 x (300 x 200mm)
Inlet/Outlet Diameters: Dual Layer: 3 x 76mm cable, Inlet 2 x 254mm, Outlet 2 x 254mm, Cool Tube 2 x 203mm
Equipment Hangers: 4
Hooks: 10
Straps: 2

Out Of Stock

Mars Hydro Led Lights

R3,630.00R14,800.00

Please expect 5-7 days before shipping from our office’s

 

Mars-Hydro Grow Light Warranty

The Mars-Hydro Grow Light Warranty means you get a 2 year extensive warranty on every grow light that’s fulfilled right here in South Africa. Any issues with your unit will be resolved quickly and without hassle. Buy with confidence, buy Mars-Hydro.
Grow Light Warranty Procedure
E-mail or call us at the first sign of any problems with your unit and we will provide you with instructions on how to proceed. Please do not open the light without our permission as we are only responsible for problems that arise through manufacturing defects.
Repairs are free of charge within two years of purchase. Repairs done after two years of purchase are for the customer’s account.
We cover all shipping charges when problems occur during the first 3 months after purchase.
Shipping charges to us after 3 months and within one year after purchase is at the customer’s expense. Aeradix (Pty) Ltd will ship back to the customer free of charge.
All shipping charges are at the customer’s expense after one year.
The warranty covers the power supply, all fans and electronic components, including, but not limited to, light emitting diodes and light emitting diode drivers.
Replacement
The light will be replaced in the event that a new replacement part does not correct the problem or there is a more complex problem. The defective unit must be returned in its original packaging and box. If any part is missing or damaged, the sender will be charged additional fees for those parts or blemishes.
Disclaimer
A repair fee is associated with the return of your product if the light has been tampered with or if the damage is caused by the customer.
The warranty becomes null and void if the warranty seal is broken without our consent.
Damage caused by abnormal use, neglect (such as dripping water), using the wrong input voltage, dropping or breaking the light, disassembling of the light, etc. voids the warranty completely.
Warranty coverage is ultimately left to the discretion of Mars-Hydro and Aeradix (Pty) Ltd. We reserve the right to refuse warranty repair or replacement services.
This warranty is subject to change without notice and is based on the warranty ultimately provided by Mars-Hydro found here.
Grow Tip
1.How do I determine the right light for my grow area?
Measure the floor space. Multiply the length times the width and this will give you the square footage. You should be able to get decent results with 30-50 actual watts of power per square foot.
2.For larger areas should I go with a single large panel or multiple medium to small lights?
Using multiple lights allows you to better distribute the intense light in more areas of the grow space instead of having all of the higher intensity light concentrated in only one area while the outer edges never receive intense light.
3.Recommended Hanging Distance Above Plants
Seedling: 60 cm-75cm, Growth: 45cm-60cm, Bloom: 30cm-45cm
4.Here are more tips for grow under our light:
Growth stage, turn Growth switch on. Bloom stage, turn Growth and Bloom switches on.
5.Recommended Lighting Time
Veg: 18/6(on/off) or 20/4(on/off) Flower: 12/12(on/off)
6.Recommended Growing Conditions
The rate of photosynthesis and transpiration are directly affected by temperature, humidity and airflow.
The perfect temperature and humidity for your plants are found between 75°-85°F and 50% – 70% humidity, with plenty of airflow to replenish CO2. PH is 6-6.5. You may add more calcium and magnesium than normally needed.
7.Please Note
The light is not water-proof, so do not use it under water environment.
Light may be too strong, please wear your sunglasses when looking at it.
Some leds seem dim. They are IR. Human eye can not see IR very clearly, but you can wear sunglasses to check.

MS6612T Digital Light Meter including LED (White & Coloured)

R1,650.00

Product takes 3 days to be recieved before shipping from our office

MS6612T LED Light Meter

 

JISC 1609:1993 and CNS 5119 general A class
All visible light and a variety of LED light sources
Measuring intensities of illumination in Lux or Foot-candles
Light intensity (CD) mode, distance setting 0.01 ~ 30m
Spectral response close to CIE luminous spectral efficiency
Silicon photoelectric diode sensor
Measured spectral range: 320 ~ 730nm
Cosine angular corrected
Auto Zero Adjustment
Peak Value, Relative, Max/Min and Hold functions
c/w carry case and battery
Ranges:
20, 200, 2000, 20000, 200000 Lux
20, 200, 2000, 20000, Foot-candle
Accuracy:
+/-3% (Calibrated to standard incandescent lamp 2854º K)
+/-6% (other visible light sources)

 

NFT -EBB flood and drain system

R350.00

The FlooT NFT system comprises of individual NFT channels. Each channel accomodates 10 plants.
The FlooT system has been designed for ease of installation. No drilling is required, simply pop-out the cut-outs for the netpots, attach some irrigation piping to the inlet and outlet points and you’re ready to start growing vegetables and herbs.
Floot is made from UV resistant material and is suitable for outdoor use.
Add as many FlooT channels side by side or lengthwise to grow as many plants as you want.

 

How it works?
FlooT can be used in a pure NFT configuration, or flood and drain (using a timer)

FT Flood-and-Drain configuration below:

 

The system comprises of:
NFT Channel for 10 plants
10 x 75mm Netpots

Dimensions & Net Weight
120cm x 14.5cm x 7.5cm
1Kg

 

OCL Lighting

R6,500.00R9,800.00

OCL-Lighting provides high quality lighting by integrating experience, creative sensibility and innovation in our products. By combining pragmatism, perfectionism and high technical standards in the design and layout work, we are able to reach truly unique results.
The OCL-Lighting systems are the new industrial standard in professional high output fixtures. Light quality is a major focal point in the industry and the OCL X series has been designed to fulfil that specific need. The systems support both HPS and metal halide lamps. The OCL double-ended (DE) HPS lamps are proven to be extremely high in PAR output, with a broader spectrum than traditional HPS lamps and only a 5% loss of light at 10.000 hours in operation. All our ballasts come standard with PowerControl™, StartSmart™ and dimming feature.
The OCL X series are the next level in professional fixtures, with the ability for central control with the OCL controllers. With OCL Lighting systems you are in control of the light!

REASONS FOR CHOOSING OCL
• Strong, heavy duty housing, double protection by conformal coating and cooling colloid, ensuring optimal functioning in various environments
• Lowest operating temperature and noise in their class
• Easy to exchange, V53 hammer tone/concave 96% reflective aluminum reflector, absolutely free of interference colors
• Ceramic industrial grade receptacles
• Free of electromagnetic interference
• Suitable for high frequency HPS 400V horticultural lamps
• Compatible with other industrial DE bulbs
• Extended lifetime: up to 95% light output performance after 1 year
• Full control of the light output in every step of the plant life cycle
• PowerControl™, StartSmart™ and low voltage protection diagnostics

Accessories Included: user manual, power cord, 1 RJ45 interlink cable for plug & play installation, OCL electronic lamp, 3 years warranty

 

Round Flat airstone

R95.00R220.00

These Hailea round ceramic air stones are high quality air diffusers that help to increase the oxygen content of all nutrient solutions. Simply attach to an Air Pump with a Silicone Airline (sold separately). Recommended for all systems!

S653 Low Range CO2 Meter and Data Logger

R4,830.00

Product takes 3 days to be recieved before shipping from our office

S653 Data Logger for CO2, Temperature and Humidity

CO2 range: 0~5,000 ppm (accuracy ≤ ±3% F.S)
NDIR technology provides increased accuracy and stability
Relative humidity: 0~100% (accuracy ±3%)
Temperature: -30~+70°C (accuracy ±0.2°C)
Data logging: 43,000 records with date & time stamp
Sample intervals selectable from 10 second to 24 hours
Start modes: Push button
Power: 3.6V Lithium batteries (approx. 6 months @ 10 min intervals)
c/w software, USB cable and 2 x batteries